Showing posts with label watt. Show all posts
Showing posts with label watt. Show all posts

Tuesday, July 30, 2013

Dual 20 Watt Audio Power Amplifier

Overture Audio Power Amplifier Series Dual 20-Watt Audio Power Amplifier with Mute and Standby Modes
The LM1876 is a stereo audio amplifier capable of delivering typically 20W per channel of continuous average output power into a 4 or 8 load with less than 0.1% THD+N. Each amplifier has an independent smooth transition fade-in/out mute and a power conserving standby mode which can be controlled by external logic.

The performance of the LM1876, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe™) protection circuitry, places it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are safeguarded at the output against overvoltage, undervoltage, overloads, including thermal runaway and instantaneous temperature peaks.

Dual 20-Watt Audio Power Amplifier Circuit diagram :

Dual 20-Watt Audio Power Amplifier

Key Specification
THD+N at 1kHz at 2 x 15W continuous average
output power into 4 or 8: 0.1% (max)
THD+N at 1kHz at continuous average
output power of 2 x 20W into 8: 0.009% (typ)
Standby current: 4.2mA (typ)

Applications :

  • High-end stereo TVs
  • Component stereo
  • Compact stereo
    Features :

  • SPiKe protection
  • Minimal amount of external components necessary
  • Quiet fade-in/out mute mode
  • Standby-mode
  • Isolated 15-lead TO-220 package
  • Non-Isolated 15-lead TO-220 package
  • Wide supply range 20V - 64V 

  • Source : http://www.ecircuitslab.com/2011/06/dual-20-watt-audio-power-amplifier.html
    See More Detail[...]

    Wednesday, June 12, 2013

    TDA1562Q 36 Watt Audio Power Amplifier circuit and explanation

    36 Watt Audio Power Amplifier Circuit Using TDA1562Q

    Its based on a Philips class-H audio amplifier IC and can deliver 36W RMS OR 70W music power, all from a 13.8V supply. Our new Mighty Midget Amplifier can really pack a punch - around 36W RMS continuous into a 4-ohm load when using a 13.8V supply. However, its the 70W of output power that it can deliver during dynamic (music) signal conditions that really make you sit up and take notice.

    Picture of 36 Watt Audio Power Amplifier Using TDA1562Q

    As can be seen from the photos and the circuit diagram, the Mighty Midget uses just a handful of parts. Its built on a PC board that measures just 104mm x 39mm but while its size may be modest, theses nothing at all modest about its power output. And the noise and distortion figures are pretty good too.

    Circuit diagram:

    36 Watt Audio Power Amplifier Circuit Diagram

    At the heart of the circuit is the TDA1562Q IC, described by Philips as a "monolithic integrated Bridge-Tied Load (BTL) class-H high-efficiency power amplifier". It comes in a 17-pin "DIL-bent-SIL" plastic package and is not only designed for use in car audio and portable PA work but for mains applications as well; eg, mini/midi audio components and TV sound.

    Parts layout:

    Parts Layout Of 36 Watt Audio Power Amplifier

    PCB layout:

    PCB Layout Of 36 Watt Audio Power Amplifier

    Performance:

    Output power:----------------------36W RMS into 4R
    Music power:-----------------------70W into 4R
    Frequency response:---------------1dB down at 28Hz and 55kHz
    Input sensitivity:-------------------130mV RMS (for 36W into 4?)
    Harmonic distortion:----------------typically 0.2% (see graphs)
    Signal-to-noise ratio:----------------95dB unweighted (22Hz to 22kHz)
    Source: Silicon Chip March 2002
    See More Detail[...]

    Friday, April 5, 2013

    2 X 40 Watt STK amplifier

    STK 4839 STK4913 STK4773 amplifier
    Components of the above is one component of ic which is applied as a reinforcement. Power amplifier used in an audio signal in order to become more powerful and can be heard via a tool that is the speaker. But in each set must have a voice amplifier, voltage, power quality is different.
    For the IC has the output power above 2 X 40 Watt with 8 Ohm output impedance. Supply voltage ranging from 18 Volt to 32 Volt.


    STK4389 amplifier circuit
    Part List
    Resistor
    R1_____1K
    R2_____1K
    R3_____22K
    R4_____22K
    R5_____1K2
    R6_____100K
    R7_____560R
    R8_____1K
    R9_____1K
    R10____470R
    R11____4R7
    R12____3K3
    R13____3K3
    R14____4R7
    R15____470R
    R16____100R
    R17____100K
    R18____1K2

    Capacitor
    C1_____470pF
    C2_____470pF
    C3_____4u7F
    C4_____4u7F
    C5_____82pF
    C6_____82pF
    C7_____47uF
    C8_____100uF
    C9_____10nF
    C10____39pF
    C11____100nF
    C12____47uF
    C13____47uF
    C14____100nF
    C15____39pF
    C16____10nF
    C17____100uF
    C18____47uF

    Intregated Circuit
    U1_____STK4773 , STK4793 , STK4803 , STK4813 , 4833 , 4843 , 4853 , 4863 , 4873 , 4893 , 4913.
    On every IC that I mentioned has a different power output.
    See More Detail[...]